Distance Between Crane and Ferris = Miles

Calculated driving distance between Crane, Texas and Ferris, Texas is miles, this equals kilometres. Estimated driving time is in current traffic conditions. With an average car, this trip would cost around $ in gasoline, since you would need about gallons of fuel.(Based on current US Gas prices and average mileage of 3.6 gallons gas per mile).

Leaving from Crane, Texas located in Texas - United States you would reach Ferris, Texas (Texas - United States) in about driving an average speed of miles per hour to cover the miles, assuming traffic conditions stay unchanged and you don't take any breaks.

Map Overview

The map overview below shows the best driving route from Crane, Texas to Ferris, Texas as a blue line on the map, with starting point (Crane) marked A, and destination point (Ferris) marked B. You can zoom in on the map to view road numbers, street names and other details both in Crane, Texas and Ferris, Texas as well as every other town near or on your route.


miles
kilometers

$ approx
gallons
Crane, Texas
Lat : 31.397362
Long : -102.350142

Ferris, Texas
Lat : 32.534026
Long : -96.665549

Elevation Graph & Altitude above Sealevel

The starting point's Crane elevation is 784.489136 m (2573.78 feet) from sea level. Destination point Ferris elevation is 143.231461 m (469.92 feet) relative to sea level.
The Graphic below shows the elevation map of the route between these cities.

Crane, Texas
Elevation : 784.489136 m
(2573.78 feet)

Ferris, Texas
Elevation : 143.231461 m
(469.92 feet)

Geographic Coordinates: Crane and Ferris

Geographic coordinates for starting point Crane, Texas in Decimal Degrees are: Latitude: 31.397362 and Longitude: -102.350142. Coordinates for destination location Ferris, Texas are: Latitude: 32.534026 and Longitude: -96.665549.

Driving directions

If you are planning a road trip from Crane, Texas to Ferris, Texas, we offer detailed, turn by turn driving directions on a printable map. To get detailled driving directions from Crane and Ferris Click here.

Flying distance between Crane, Texas and Ferris, Texas

With our Flight Distance Calculator you can find the straight line distance between locations. To get the flight distance between Crane and Ferris Click here.
You can also use this tool to locate airports nearby Crane, Texas and Ferris, Texas, estimate flight duration time and lookup timezone info and view the local time.

Cost of driving from Crane, Texas to Ferris, Texas

Depending on the fuel efficiency level of your car, driving from Crane, Texas to Ferris, Texas will cost you between $ and $ approximately. An average car makes this trip for approximately $. Driving costs are calculated based on average gas prices in the US - Toll and other costs are not included in this calculation.

Rate this Tool

Did you find this tool useful? Please rate it below

  Rated 4.5
based on 513 votes.

Distance Between Crane and Ferris

Calculate the driving distance between the 2 cities Crane and Ferris
Rated 4.5/5 based on 513 reviews
Share

Recently Checked Distances